How a roof is slated

A slate roof is laid on a waterproof underlay and treated softwood battens set at a gauge worked from the slate size and the pitch. Each slate is held by two jagged copper nails, 2.65 mm thick and 30 mm long, and one copper rivet at the bottom edge. Slates sit 3 to 4 mm apart. The Irish code of practice is S.R. 82:2017, from the NSAI.

The order of work, the gauge and lap for common slate sizes and what holds each slate on.

Free and no obligation. Your request goes to one roofer in your county, not a list.

  • 245–250 mmbatten gauge, 600 × 300 mm
  • 90–110 mmheadlap, 600 × 300 mm
  • 2 nails + 1 rivetin each slate
  • 3 coursesof slates at the eaves
A dark slate roof with a row of dormer windows

The order of work

  1. Underlay. Laid over the rafters with side laps of at least 100 mm and head laps of 150 mm at 25 to 34° where it is not fully supported, down to 100 mm and 75 mm at 35° and above.
  2. Battens. Softwood, at least 1,200 mm long with the ends supported. In the Republic the minimum is 47 × 22 mm for rafters up to 400 mm apart and 47 × 35 mm for 401 to 600 mm.
  3. Eaves. Three courses of slates at the eaves, overhanging about 50 mm into the gutter.
  4. The field of the roof. Slate by slate up to the ridge, each course overlapping the one below.
  5. Hips, valleys and verges. A verge overhangs by no more than 50 mm.
  6. Ridge and flashings. The ridge fixed with screws, lead at the chimneys and walls.

Price your slate roof

Three taps and the price shows as you go. Your name and number come last, and only if you want a roofer to price it.

A new slate roof, semi-detached house, matching the slate that is there: €8,000 to €18,000.

Step 1 of 5

What do you need done?

Pick the closest. The roofer asks the rest.

How the price is worked out

Each figure is a range from Irish price pages. A whole-roof range comes from a roofing price guide and covers a re-roof of a house of that type. Where the roof area decides the price, you see a rate a m² instead. Repairs, ridge and flashing work and cleaning show the ranges for those jobs. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a roofer prices yours after looking at the roof.

Gauge and lap

600 × 300110 mm lap245 mm gauge
600 × 300100 mm lap250 mm gauge
500 × 250100 mm lap200 mm gauge
400 × 400100 mm lapover 35°

On a 600 × 300 mm slate in normal exposure the headlap is 110 mm at 25 to 30°, 100 mm at 30 to 35° and 90 mm above 35°. The batten gauge is 245 mm at a 110 mm lap and 250 mm at 100 mm. A 500 × 250 mm slate is laid at 200 mm gauge with a 100 mm lap.

Fixings

Each slate is held by two jagged copper nails, 2.65 mm thick and 30 mm long, and one copper rivet at the bottom edge. Slates sit 3 to 4 mm apart. Slates 'and a half' and doubles take three nails and two rivets. A copper rivet holds the bottom edge so wind cannot lift it.

The fixing figure behind this is a wind loading of 2,000 N/m² for a 600 × 300 mm slate and 2,500 N/m² for a 500 × 250 mm one. Ask the roofer to say that copper is what is going in, because the guide says iron nails were what failed on old roofs.

Ventilation

With a vapour-permeable underlay the batten space is ventilated through a 25 mm counterbatten void. A cold roof keeps a 50 mm clear air path. A continuous eaves vent is 25 mm, and a ventilated ridge roll gives 5,000 mm² a metre. Slate roof vents and ridge tiles.

Questions before you book

How is a slate roof laid?

A slate roof is laid on a waterproof underlay and treated softwood battens set at a gauge worked from the slate size and the pitch. Each slate is held by two jagged copper nails, 2.65 mm thick and 30 mm long, and one copper rivet at the bottom edge. Slates sit 3 to 4 mm apart. The Irish code of practice is S.R. 82:2017, from the NSAI.

What is the headlap on a slate roof?

On a 600 × 300 mm slate in normal exposure the headlap is 110 mm at 25 to 30°, 100 mm at 30 to 35° and 90 mm above 35°. The batten gauge is 245 mm at a 110 mm lap and 250 mm at 100 mm.

What nails are used on slates?

Each slate is held by two jagged copper nails, 2.65 mm thick and 30 mm long, and one copper rivet at the bottom edge. Slates sit 3 to 4 mm apart.

What size are the battens?

In the Republic, 47 × 22 mm for rafters up to 400 mm apart and 47 × 35 mm for rafters 401 to 600 mm apart, in softwood.

How many courses go at the eaves?

Three, overhanging about 50 mm into the gutter.

Where do I read the standard?

S.R. 82:2017 is the NSAI code of practice for slating and tiling.

Everything on this site

Blue-grey slates in a scalloped pattern around a small dormer

See the price before anyone rings

Pick the job, the house and the slate. When you want a firm price, it goes to a single roofer in your county.