Ridge tiles for slate roofs
Ridge tiles for a slate roof are clay or a specialist slate ridge part, not the half-round concrete tile made for concrete roofs. A clay ridge tile is €14.13 each, and a 6 m dry-fix ridge kit is €71.02. Resetting a ridge is €800 to €2,200.
Which ridge goes on a slate roof, what it costs and how it is fixed.
Free and no obligation. Your request goes to one roofer in your county, not a list.
- €14.13a clay ridge tile, 440 mm
- €71.02a 6 m dry-fix kit
- €800–€2,200to reset a ridge
- 15–60°roof pitch for the dry-fix kit

Which ridge for a slate roof
Clay ridge tile
- Price
- €14.13 a tile, 440 mm
- Fixing
- Bedded or fixed with screws
- Ventilation
- Not by itself
- Fits
- Natural and fibre cement slates
Dry-fix ridge kit
- Price
- €71.02 for 6 m
- Fixing
- Mechanical, with no mortar
- Ventilation
- A 5 mm continuous gap along the ridge
- Fits
- Clay and concrete ridge tiles, and slates
The merchant's page says natural slate roofs benefit from clay or specialist slate ridge components, and that half-round concrete is for concrete tiles.
Price your slate roof
Three taps and the price shows as you go. Your name and number come last, and only if you want a roofer to price it.
A ridge or flashing repair, semi-detached house, matching the slate that is there: €500 to €2,200.
How the price is worked out
Each figure is a range from Irish price pages. A whole-roof range comes from a roofing price guide and covers a re-roof of a house of that type. Where the roof area decides the price, you see a rate a m² instead. Repairs, ridge and flashing work and cleaning show the ranges for those jobs. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a roofer prices yours after looking at the roof.
How a ridge is fixed
The fixing guide for fibre cement slates uses 60 x 6.3 mm self-sealing wood screws, set 50 mm up from the bottom edge of the ridge unit into an extra ridge batten downslope. The top course of slates is head-nailed, with a 5 mm clear gap. A ventilated ridge roll gives 5,000 mm² of airflow a metre.
Close mitred hips are not for pitches below 35°. Ask what the hips will be on your roof.
Why ridges fail first
The heritage guide says the ridge junction should be properly bridged against rain and wind. Clay ridge tiles have been used for centuries, and lead rolls were used as ridge capping in good work from the seventeenth century. A ridge that has slipped is a €800 to €2,200 job. Slate roof repairs.
What to ask
- Which ridge. Clay or dry-fix, and the make.
- How it is fixed. Screws and brackets, or mortar.
- The ventilation. Whether the ridge gives any, and how much.
- The hips. Mitred or capped, and the pitch they are for.
Other slates and parts to look at
Natural slateCut from rock and split by hand or machine. Laid, €95 to €180 a m².
Blue Bangor slateThe Welsh slate on a lot of older Irish roofs, and the one people ask for by name.
Fibre cement slatesMade to look like slate, 4 mm thick. Laid, €40 to €60 a m² before VAT.
Slate roof tilesWhat the trade calls a slate and a shopper calls a tile, and the sizes they come in.
Slate effect sheetsSheets and boards that give a slate look for sheds, garages and extensions.
Slate or tileNatural slate runs 80 to 100 years. Concrete tiles run 40 to 60 years.Questions before you book
What ridge tiles go on a slate roof?
Ridge tiles for a slate roof are clay or a specialist slate ridge part, not the half-round concrete tile made for concrete roofs. A clay ridge tile is €14.13 each, and a 6 m dry-fix ridge kit is €71.02. Resetting a ridge is €800 to €2,200.
How much is a ridge tile?
A 440 mm clay ridge tile is €14.13 each.
What is a dry ridge system?
A mechanical fixing with no mortar. A 6 m ventilated kit is €71.02, for pitches of 15 to 60°.
Can I use half-round concrete ridge tiles on slate?
They are made for concrete tiles. The merchant page recommends clay or specialist slate ridge parts for slate.
How much does it cost to reset a ridge?
€800 to €2,200.
Everything on this site
Costs and jobs

See the price before anyone rings
Pick the job, the house and the slate. When you want a firm price, it goes to a single roofer in your county.
